Equipment Design & Application
VEB-006: Medium-Voltage Harmonic Filter Design: Engineering for Reliability
- Problem: Marginal filter designs based on idealized models often lead to component overheating and premature failure in real-world field conditions.
- Solution: A System-Fit™ approach utilizing significant conservatism in capacitor, iron-core reactor, and resistor ratings to ensure long-term reliability.
- View HTML | Download PDF
VEB-004: Steps Versus Stages and Stage Size
- Problem: Interchangeable use of “steps” and “stages” leads to confusion in control resolution, switching duty, and equipment cost during the specification phase.
- Solution: Guidance on selecting optimum stage weighting and sizes based on voltage rise, load profile, and switching economics.
- View HTML | Download PDF
System Protection & Blown Fuse Detection
VEB-001: Direct Blown Fuse Detection
- Problem: Traditional indirect unbalance schemes fail to detect fuse thermal failure in compact, medium-voltage metal-enclosed banks.
- Solution: Implementation of direct fuse sensing with thermal actuation to provide unambiguous indication and prevent catastrophic enclosure damage.
- View HTML | Download PDF
VEB-002: Split-Wye Neutral Current Detection
- Problem: Identifying the most robust indirect unbalance method for ungrounded double-wye capacitor banks.
- Solution: Utilizing neutral CTs to provide sensitivity to internal unbalance while remaining immune to external system voltage unbalance and remote ground faults.
- View HTML | Download PDF
VEB-003: Single-Wye Neutral Voltage Detection
- Problem: Assessing the limitations and switching-duty concerns associated with neutral PTs in single-wye ungrounded banks.
- Solution: A practical guide to setting relay thresholds (Alarm/Trip) and navigating the risks of PT saturation and restrike.
- View HTML | Download PDF
Transient Analysis & Mitigation
VEB-007: Capacitor Bank Switching: Peak Inrush Current
- Problem: High-frequency back-to-back switching transients cause contact erosion, micro-welding, and subsequent restrikes in switching devices.
- Solution: Evaluation of device technologies (Vacuum, SF6, Oil) and the application of Transient Limiting Inductors (TLIs) or Point-on-Wave switching.
- View HTML | Download PDF
VEB-008: Capacitor Bank Outrush & Close-in Fault Analysis
- Problem: Energized capacitor banks discharging into nearby faults can expose adjacent “Victim Breakers” to currents exceeding their making capability.
- Solution: Standards-based evaluation of breaker classifications (C0, C1, C2) and the use of outrush reactors to protect substation safety.
- View HTML | Download PDF
VEB-009: Reactor-Limited Fault TRV and Breaker Duty
- Problem: Air-core reactors can impose severe Rate-of-Rise-of-Recovery Voltage (RRRV) that exceeds the dielectric recovery capability of standard breakers.
- Solution: A methodology for calculating duty-adjusted breaker capabilities and optimizing surge capacitor sizing to mitigate TRV peaks.
- View HTML | Download PDF
Specialized Engineering Challenges
VEB-005: Insulation Coordination for High-Altitude Power Systems
- Problem: Automatically specifying higher BIL equipment at altitude results in inflated costs, larger footprints, and procurement difficulties.
- Solution: Rigorous insulation coordination using surge arresters to utilize standard equipment ratings at elevations exceeding 1,000 meters.
- View HTML | Download PDF
VEB-010: Preliminary Sizing and Performance of Motor Starting Systems
- Problem: Large motor starts impose severe voltage sags that reduce starting torque and disturb connected plant equipment.
- Solution: Using the MotorVAR steady-state impedance method to estimate voltage performance and torque margin for various starting configurations.
- View HTML | Download PDF
Technical Support
Need assistance with a specific application? VarStec combines practical engineering expertise with specialized equipment solutions.